DWV Fittings

DWV Plain Coupling – Sizes: 40mm to 300mmThe DWV Plain Coupling is a reliable, non-threaded fitting designed to join two sections of DWV pipe in drainage, waste, and vent systems. With a smooth internal bore, both ends accept pipe via solvent-weld connection, ensuring a...

The DWV Threaded Coupling is a rigid PVC-U fitting that joins sections of DWV pipe and provides a threaded end for a DWV access cap (sold separately), making it ideal where a cleanout or inspection point is needed.- Sizes: 100mm, 150mm, 225mm and 300mm-...

The DWV Level Invert Taper (LIT) is a PVC-U fitting that reduces the diameter of a drainage pipe run while keeping a consistent invert level, avoiding internal steps that disrupt flow. The large end inserts into the larger pipe and the smaller pipe fits...

The Aztec DWV Socket Reducer is a pale-grey PVC-U fitting used to reduce pipe size within a drainage, waste and vent (DWV) run, giving a clean transition from a larger to a smaller pipe diameter in domestic and commercial plumbing.- Sizes: 50x40, 65x40, 65x50,...

DWV Pipe Reducer – Sizes: 50mm to 150mmThe DWV Pipe Reducer is engineered to transition between different pipe diameters within a Drainage, Waste, and Vent (DWV) system. Featuring a stepped design, the larger end fits snugly inside an existing pipe, while the smaller end...

The Plastec DWV Male Coupling connects standard DWV pipe to a matching threaded female fitting, with one plain end for solvent welding and one male-threaded end, for residential and commercial drainage systems.- Sizes: 40mm and 50mm- Connection: one plain solvent weld end x one...

DWV Male Adaptor – 40mm & 50mmThe DWV Male Adaptor is designed to connect a DWV fitting to a male-threaded fitting of the same size. With a solvent-weld socket on one end and a male BSP thread on the other, it allows for a...

DWV Female Coupling – Sizes: 40mm & 50mmThe DWV Female Coupling is engineered to connect PVC pipe with a male threaded fitting of the same nominal diameter. One end is socketed for solvent-weld joining with standard DWV pipe, while the other end provides a...

DWV Female Adaptor – Sizes: 40mm & 50mmThe DWV Female Adaptor is designed to connect DWV (Drainage, Waste and Vent) fittings to a female threaded component of the same size. The solvent weld end fits neatly into a DWV fitting, creating a secure and...

DWV 5° Bend FF (Female x Female)Sizes: 100mm to 300mmThe DWV 5° Bend FF is a plain PVC-U fitting used to provide a subtle 5-degree directional change in drain, waste, and vent (DWV) piping systems. With a socket (female) opening on both ends, this...

DWV 5° Bend MF – Sizes: 100mm to 150mmThe DWV 5° MF (Male/Female) Bend is designed to provide a gentle change in pipe direction within Drainage, Waste, and Vent (DWV) systems. With a 5-degree angle, this fitting helps correct minor alignment issues or subtle...

DWV 15 Degree Bend MFSizes: 100mm to 255mmThe DWV 15 Degree Bend MF (Male-Female) is a precision-moulded PVC-U fitting used to alter the direction of drainage pipework by 15 degrees. One end is pipe-sized (male), designed to fit snugly into a mating fitting, while...

DWV 30° Bend FF (Female x Female)Sizes: 100mm to 300mmThe DWV 30° Bend FF is a plain PVC-U fitting designed to create a 30-degree directional change in drainage pipework. With a female (socket) connection on both ends, it allows pipe insertion from either side,...

DWV MF Bends. These bends have no openings. They allow for change of direction of pipework. One end is pipe-size and fits inside a fitting intended for pipe, the other end fits pipe. They are available in different sizes and angles.DWV (Drainage, Waste and...

This DWV 45 degree bend is a PVC-U fitting used to change the direction of drain, waste and vent pipework by 45 degrees. Both ends are plain sockets where the pipe fits inside the fitting (FF), giving smooth drainage flow in domestic and commercial...

DWV 45° Bend MF – Sizes: 40mm to 300mmThe DWV 45° MF (Male/Female) Bend is designed to create a smooth directional change in drainage systems. This bend has one male (pipe-sized) end and one female (fitting-sized) end, providing a secure and efficient connection for...

This PVC-U DWV 90° bend changes the direction of drain, waste and vent pipework by 90 degrees in domestic and commercial drainage. Both ends are plain sockets (female-female), so the pipe fits inside each end and is joined with solvent cement.- Sizes: 40, 50,...

DWV 90 Degree Bend MFThe DWV 90 Degree Bend MF is a standard drainage fitting used to change the direction of pipework in Drain, Waste & Vent (DWV) systems. Designed with a male and female (MF) configuration, it allows for a secure solvent-weld connection...

DWV IO Bend 90° (Inspection Opening) – Sizes: 40mm to 100mmThe DWV IO Bend 90° is a precision-moulded PVC-U fitting designed for non-pressure drainage systems. Featuring an integrated Inspection Opening (IO), this fitting allows easy access for clearing blockages or conducting maintenance, making it...

The Holman DWV 45° Junction is a pale-grey PVC-U plain junction used to add a branch to drainage, waste and vent (DWV) pipework in domestic and commercial applications. The pipe fits inside the fitting.- Sizes: 40, 50, 65, 100, 150, 225, 300 and 375mm-...