983 results found for “pumps*”

The Maxijet Hyjet DHJ800 is a self-priming, surface-mounted pressure jet pump for house and garden water supply, irrigation and rainwater tank pump sets. It starts and stops on demand via its automatic electronic pressure controller and comes with plug-and-play leads, so it is ready...

The Onga Flotec Autojet 40 is an easy-to-install automatic pressure system for using tank water around the house and garden. Fitted with a Press control, it starts automatically on demand and suits both above-ground and below-ground tanks.- Autojet 40: 450W, 58 L/min, 380 kPa-...

The VF150 is a single phase drainage pump with cast iron construction making it durable and providing a longer life cycle. They are a handy asset to plumbers, drainers and general house holders. Applications include septic effluent disposal, water transfer, grey water and sump...

Grundfos UPS 20-60 N 150 Three Speed Stainless Steel Hot Water Circulator – 96913096The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by...

Hyjet HSJ370 Stainless Steel Self Priming Jet PumpHSJ series are horizontal stainless steel, self priming jet pumps, ideal for pumping clear water and other non aggressive liquids. HSJ series have a tough construction, with a stainless steel shaft and impeller, and IP55 rated motors....

Performance Range Flow rate up to 60 l/min (4.23m³/h) Head up to 60m Installation and Use JCRM-1A-EP1 self-priming pump is designed to draw water and liquids that contain air. This pump includes an Easy press 2 pressure controller. They are reliable and easy to...

Grundfos UPS 32-80 N 180 Three Speed Stainless Steel Hot Water Circulator – 95906448The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by...

Compact, reliable, horizontal, multistage, end-suction centrifugal pump with axial suction port and radial discharge port. Pump materials in contact with the liquid are in stainless steel. The mechanical shaft seal is a special designed, unbalanced O-ring seal. Pipework connection is via internal Whitworth pipe...

COMPAC 200A high performance submersible pump for clean water designed to drain standing water and domestic waste water, empty flooded rooms and draw water from wells, basins and cisterns. Flotec Compac 200 pumps are ideal for limited spaces, complete with integrated float switch that...

OverviewThe UPS 25-60 N 180 is a canned rotor-type circulator pump, meaning the pump and motor form an integral unit without a shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid, and the pump includes a...

The MHR20 Series is a fully Automatic Hydraulic Rain/Mains water changeover device designed for pressure pump supply systems in harvesting rainwater for the toilet, laundry and household applications with automatic mains backup.The MHR20 Valve is designed to operate with an electronic pressure controller with...

The MHRS1 MaxiSAVE MHR25 is a fully automatic hydraulic rainwater-to-mains water changeover valve designed for use with pressure pump systems. Ideal for domestic and commercial water-saving applications such as toilet flushing, laundry, and general household use, the MHR25 seamlessly switches to mains water when...

The MHR20 Series is a fully Automatic Hydraulic Rain/Mains water changeover device designed for pressure pump supply systems in harvesting rainwater for the toilet, laundry and household applications with automatic mains backup.The MHR20 Valve is designed to operate with an electronic pressure controller with...